Colour fastness refers to the resistance and stability of the colour to (UV) light and environmental influences ("light-fast"). Our decorative KEMPERDUR products are designed to be UV resistant and colour fast.

From specialist trade merchants (usually roofing merchants).

KEMPEROL waterproofing systems are high-quality products and therefore cost more than conventional waterproofing products that consist of sheeting.

KEMPEROL AC Speed is currently the fastest PMMA-based waterproofing system. As an alternative, application of odourless KEMPEROL 2K-PUR can be accelerated by using KEMPEROL 2K-PUR Speedshot.

The ageing resistance to light (UV light) according to ETAG 005 has been proven for our waterproofing products.

All KEMPEROL waterproofing systems are root proof and tested to FLL standards.

It is generally recommended to scatter two-component primers with an appropriate product. Scattering sand onto the surface is absolutely necessary for all epoxy resin-based products (KEMPERTEC EP Primer / KEMPERTEC EP5 Primer). By scattering natural quartz (1500-2000 g/m²) onto the primer, a surface with the appropriate roughness is achieved ensuring an optimum adhesive bond with the next layer.

This also serves as a protection of the primer against UV radiation, especially if longer work interruptions (longer than 2 weeks) are necessary.

That obviously depends on the respective primer and the weather conditions while taking into account the substrate, ambient and application temperature. Please refer to the technical data sheet of the respective primer for the times.

Individually according to substrate and waterproofing product, but generally a KEMPERTEC EP or KEMPERTEC EP5 Primer. In general, the priming recommendations must be observed.

The even scattering of KEMCO Natural Quartz in the still fresh primer is necessary for the following reasons. KEMPERTEC EP Primers must be scattered with sand due to the chemical properties of the epoxy resins, since it is not possible to determine an exact time window for resurfacing a non-scattered EP primer. In addition, scattering ensures a larger surface for enhancing waterproofing adhesion. Furthermore, the scattering of quartz sand protects the primer against environmental influences, such as UV radiation and mechanical stress.

The pot life of reactive materials is the time during which the product can be applied. It is sometimes also called "period of use". It is therefore the time between mixing a multi-component product (or, in the case of one-component products, the opening of the container) and the end of its usability, i.e. the period of time in which the substance can still be "taken out of the pot". In most cases, the end of the pot life is indicated by a significant increase in viscosity (increase in toughness), which prevents further application. With our products, the pot life and workability time are not generally the same. The change in viscosity influences the absorbency and saturation behaviour considerably (in relation to the substrate or fleece)

As a rule of thumb, products with a viscosity significantly greater than that of liquid honey should no longer be applied.

Almost all KEMPEROL waterproofing systems are approved products and display European Technical Approvals. KEMPEROL 2K-PUR, KEMPEROL 1K-PUR, KEMPEROL AC Speed, KEMPEROL BR correspond to the rules regarding waterproofing materials and the regulations of current waterproofing standards (DIN standards 18531 - 18535). For some KEMPEROL waterproofing systems there are general test certificates available for various applications.